Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
This paper focuses on the gas sensing properties of the mixed-potential-type yttria stabilized zirconia (YSZ)-based NO2 sensor with NiO sensing electrode. The sensing characteristics of the sensors have been improved by controlling the microstructure of NiO sensing electrode synthesized with the microwave. The microstructure of NiO strongly depended on the microwave treatment temperature and the sintering...
Solid state electrochemical sensors using yttria-stabilized zirconia (YSZ) plate and Cr2O3-WO3 nanocomposites were fabricated. The effects of the sintering temperature on the electrode microstructure were investigated. It was found that the sensor sintered at 1000 °C exhibited larger sensitivity to NO2 in the examined range of 20–300ppm than other sensors sintered at 800 °C, 900 °C, and 1100 °C; and...
A NASICON-based electrochemical device attached with an oxide electrode was developed for the detection of Cl2 in air at high temperature. Among the oxides tested, Cr2O3 was found to be the best suited for the sensing electrode. The ΔEMF value of the device attached with Cr2O3 was almost linear with the logarithm of 5–50 ppm Cl2 concentration. It was also observed that the sensor showed a speedy response...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.