Dislocation emission criterion for a wedge crack under mixed mode loading was investigated using Airy stress function. The order of singularity at the wedge crack tip due to remote loading was found to vary with the loading mode. The plastic zones for plane stress and plane strain were studied based on von Mises' and Tresca criteria. The dislocation emission criterion was examined for both loading modes. The mechanism of crack propagation was believed to be controlled by dislocation emission. Under an action of Mode I loading, the wedge tip movement occurred when a pair of edge dislocations of Burgers vectors be iθ and −be −iθ were emitted from the wedge tip where b and θ were the magnitude of Burgers vector and the angle between the positive x axis and the line connecting from the tip to dislocation. Similarly, under an action of Mode II loading, the wedge crack tip moved as soon as either an edge dislocation of Burgers vector along the x direction was emitted from its tip or a pair of edge dislocations of Burgers vectors be iθ and be −iθ were emitted from the wedge tip. The conventional mechanism of crack propagation based on the energy release rate was not expected to occur. The calculated results for a few special cases were presented and compared with those reported in the literature.