The microfabrication of Foturan ® glass ceramic as a potential substrate material for micro-solid oxide fuel cells (micro-SOFC) was investigated. Foturan ® was etched in 10% aqueous hydrofluoric (HF) acid solution at 25°C with a linear rate of 22±1.7μm/min to create structures with an aspect ratio of 1:1 in 500μm-thick Foturan ® substrates for micro-SOFCs. The concentration of the HF etchant was found to influence the etching rate, whereas the UV-exposure time creating nuclei in the glass for subsequent crystallization of the amorphous Foturan ® material had no significant influence on the etching rates. The surface roughness of the crystallized Foturan ® was determined by the crystallite size in the order of 10–15μm. Free-standing micro-SOFC membranes consisting of a thin film Pt cathode, an yttria-stabilized-zirconia electrolyte and a Pt anode were released by HF etching of the Foturan ® substrate. An open-circuit voltage of 0.57V and a maximum power density of 209mW/cm 2 at 550°C were achieved.