Rise characteristics of vapor bubbles after the departure from a nucleation site in forced convective subcooled flow boiling were studied visually using two synchronized high speed video cameras. The test section was a transparent glass tube of 20mm in inside diameter, filtrated and deionized tap water was used as a working fluid, and the flow direction adopted was vertical upward. The outer surface of test section tube was electrically heated to generate vapor bubbles inside of the tube. In the present experiments, the mass flux and liquid subcooling were varied within 94–1435kg/m 2 s and 2.2–10K, respectively. Since the observations were performed at low heat fluxes to avoid the significant increase in the number of active nucleation sites, the obtained bubble images were clear enough to carry out the detailed image analysis for the rise characteristics of individual bubbles. The following three different bubble rise paths were observed after the departure from nucleation sites: some bubbles slid upward the vertical wall for long distance, while other bubbles were detached from the wall after sliding for several millimeters and then migrated toward the bulk liquid; after the migration, some of the detached bubbles were collapsed in subcooled liquid but others remained close to the wall and were reattached to the wall. The results of detailed image analyses suggested that the variation in bubble shape from flattened to more rounded was of primary importance for the occurrence of bubble detachment from the wall.