Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
Fatigue tests were performed on lugs in five cases with stress ratio R=0.1 and maximum load F max =44 kN. However, it was found that there was a remarkable scatter of fatigue lives even in identical tests. Fractography of the fractured lugs has shown that each crack initiated at one origin, which was on the hole surface and near one side of the lug. Stress analysis has demonstrated that the crack origins locate in a high stress region and the fatigue stresses make the lugs fail in range of 10 5 -10 6 cycles. Detailed examination of the microstructure of the lugs has shown that the recrystallization degrees in the lugs vary. It is the scatter of recrystallization degree that increases the fatigue lives of lugs. A further analysis has indicated that the scatter of recrystallization degree may result from the differences of original bar stock sizes and deformations in die forging.