In this work, we perform an extensive campaign of three-dimensional numerical simulations of CIGS solar cell structures to investigate the effect of a surface-passivated CIGS with point contacts openings on the cell performance parameters (Jsc, Voc, FF and η). Detailed analysis of the combination of passivation thickness, point contact size and pitch is performed under the hypothesis of highly defective CIGS front surface and ideal chemical passivation: efficiencies close to the case of ideal (i.e., defect-free) CdS/CIGS interface can be achieved by optimized nanometer-scale point contact arrays. To account for field-effect passivation due to positive residual charge density, Qf, within the passivation layer, we vary Qf in the range 1010–1013cm−2 under the two extreme scenarios of ideal or ineffective chemical passivation. Several examples of CIGS cells with different buffer layers (CdS, ZnO, ZnMgO, In2S3, Zn(O, S)) are also analyzed. We find that a positive Qf in the interval 1012– 5·1012cm−2 can help completely recover the ideal cell efficiency, irrespective of the chemical passivation effect and even in the presence of unfavorable conduction band alignment at the buffer/CIGS heterojunction. This may help devising solutions with buffer materials alternative to CdS, boosting the performance of otherwise surface-limited cells. The effect of grain boundary defect density and position with respect to point contacts is also addressed, with a grain dimension of 750nm.