Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
A review of the superhydrophobicity of engineering surfaces with particular emphasis on the effect of friction and wear on the wetting characteristics is presented. Different theoretical aspects, experimental practices, and numerical modeling techniques are discussed. The problem of stability and durability of superhydrophobic surfaces from both theoretical and practical points of view is emphasized...
Nanoparticles have been recently explored as lubricant additives for improving tribological performance of metal-forming tools. Halloysite clay nanotubes (HNTs) are naturally-occurring, low-cost, and non-toxic nanoparticles, making them attractive as green lubricant additives. In this study, HNTs were dispersed at varying concentrations (0.01, 0.05, and 0.10wt%) within a polymeric lubricant for metal-forming...
Rubber friction depends on the surface roughness of the counter surface, e.g. a road surface. We have measured the friction for two rubber compounds sliding on randomly rough surfaces produced by 3D-printing. The surfaces had different macro-roughness and the friction experiments were performed over six decades in speeds, from 10−6ms−1 to 1ms−1, on both dry and lubricated substrates. The viscoelastic...
The effects of chromium additions on three-body abrasive wear behavior of Fe-3.0wt% B alloy have been systematically investigated using a moving wedge type of apparatus and two types of abrasives (SiC and SiO2 grains). Features of both the worn surface and subsurface have been discussed with regard to the respective wear rates. As chromium increased, the wear rate of Fe-3.0wt% B alloy first decreases...
Design of the drill–bit and selection of the Cemented Tungsten Carbide (CC) grade for drill–bit inserts are crucial for efficient percussive drilling. This study presents the results of an experimental campaign executed with the aim to identify the distinctive wear mechanisms and behaviour of different CC grades. Three laboratory and one full–scale drilling tests were performed using nine CC grades...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.