Przeprowadzono statystyczna, analizę jednorodności wyników badań przepuszczalności laboratoryjną metodą RILEM-Cembureau. W badaniach tych stosowane były próbki walcowe o średnicy 150 mm i grubości 50 mm wycinane z większych próbek o średnicy 150 mm i wysokości 300 mm. Badaniom poddano beton wysokowartościowy z cementu portlandzkiego z dodatkiem pyłu krzemionkowego i z kruszywa bazaltowego. Przeprowadzona analiza dotyczy przede wszystkim wpływu usytuowania próbek 150/50 mm w próbce wyjściowej 150/300 mm na wartości oznaczanej przepuszczalności i jej jednorodność. Usytuowanie to ma wyraźny wpływ na ocenianą przepuszczalność. Z im niżej położonej części próbki wyjściowej pochodzą próbki tym mniejsza jest ich przepuszczalność i tym większa jednorodność.
A statistical analysis of the homogeneity of results of the permeability test of the high-performance concrete to a steady flow of a gas (nitrogen) according to RILEM-Cembureau method is performed. In these tests cylindrical samples 150 mm in diameter with thickness 50 mm, cut out from greater cylindrical specimens with dimensions 1500 in diameter and 300 mm high were used. These tests were applied to high performance concrete of Portland cement with addition of silica fume and of basalt aggregate. The analysis concerns first of all the effect of the location of the samples 150/50 mm in the initial sample 150/300 mm on the values of examined permeability and its homogeneity. This location has a well-marked effect on the value of the measured permeability. In general, the permeability is lower and the homogeneity of obtained results is higher if samples are cut in the bottom part of the initial specimen.