Zn and ZnTi0.0l at.% single crystals were deformed in a compression test in the (0001)<11-20> system up to a gamma= 0.2 range at temperatures 77K, 150K, 293K, 373K, 473K. Two deforming rates were used; 10-4 S-1 and 10-3 s-1. On the base of obtained compression curves of the critical resolved shear stress CRSS, the hardening coefficient within the range of easy slip and activation volume V* were determined. A substantial impact of small additions of Ti (0.01at%) on the process of crystals strengthening was established. The CRSS value single crystals of pure Zn was changing within a range of 0.46MPa at 77K to 0.27MPa at 473K, wheras for ZnTi0.0l at.% it amounted respectively 1.96MPa i 0.87MPa. The hardening coefficient was changing respectively from 11.1 MPa to 0.97 MPa for Zn, and from 80.4 MPa to 7.2 MPa for ZnTi0.0l at.%. The activation volume V* was rising monotonically with temperature inside a range of 12.7 to 46 × 10-20 cm3 for ZnTi0.0l at.% and 2.1 to 9.8 × 1020 cm3 for Zn.
Monokryształy Zn oraz ZnTi0.01at% odkształcano w próbie ściskania w systemie (0001)<11-20> do zakresu gamma=0.2 w temperaturach 77K, 150K, 293K, 373K, 473K. Stosowano dwie prędkości odkształcenia; 10 do -4 s do-1 oraz 10 do -3 oraz 10 do -3 s do -1. Na podstawie uzyskanych krzywych ściskania wyznaczano krytyczne napreżenie ścinające KNS, współczynnik umocnienia w zakresie łatwego poslizgu oraz objetość aktywowaną. Stwierdzono silny wpływ niewielkich ilości dodatku Ti na proces umocnienia monokryształów Zn. Wielkość KNS dla monokryształów czystego Zn zmieniała się od 0.46 Mpa w 77K do 0.27b MPa w 473K, natomiast dla monokryształów ZnTi0.01at.% wynosiła 1.96 MPa i 0.87 MPa. Wspołczynnik umocnienia zmieniał się odpowiednio 11.1 MPa do 0.97 MPa dla Zn oraz 80.4 MPa do 7.2 MPa dla ZnTi0.01at.%. Objetość aktywowana wazrastał monotonicznie wraz z temperaturą w zakresie 12.7 do 46x10 do -20 cm sześc. dla ZnTi0.01at.% oraz 2.1 do 9.8x10 do -20 cm sześć. dla Zn.