The article presents the results of investigations on the process dynamics of the formation, motion and disappearing of discharge channels in the AC electric arc at Im = 500 A and Im = 80 A at atmospheric pressure, carried out with ultra-high-speed film cameras: analog one of SFR type (100000 frames per second) and digital one FASTCAM APX type from Photron (20 000 frames per second). The investigated process, which consists in shunting the arc by new discharge channels, has a significant influence on the arc voltage and power released in arc, and thereby on the possibility of extinguishing the arc, which is essential for the efficient breaking of electric circuits and for endurance of switches. The influence of the material, tip and distance of electrodes on the number of newly formed channels was investigated for electrodes with tips, made of Cu, Fe, Mo, W, at distances between electrode axes 22 mm and 26 mm. It may be concluded from the stepped manner of the displacement of newly formed channels that there is no connection between that displacement and the mass motion. The mechanism of the displacement may be similar, for instance, to the less widespread mechanism represented by the so called Maecker's cloud model.
W artykule przedstawiono wyniki badań dynamiki procesu powstawania, ruchu i zaniku kanałów wyładowczych w łuku prądu przemiennego o Im = 500 A i Im = 80 A przy ciśnieniu atmosferycznym, wykonane za pomocą ultraszybkich kamer filmowych - analogowej typu SFR (100 000 kadrów/s) i cyfrowej typu FASTCAM APX firmy Photron (20 000 kadrów/s). Badany proces, polegający na bocznikowaniu łuku nowymi kanałami wyładowczymi, ma znaczny wpływ na napięcie łuku, oraz moc wydzielaną w łuku, a tym samym możliwość jego zgaszenia, co jest kwestią zasadniczą dla skuteczności wyłączania obwodów elektrycznych i trwałości łączników. Zbadano wpływ materiału, kształtu czoła i odstępu elektrod na liczbę nowo powstających kanałów wyładowczych dla elektrod o różnych czołach (r = 4 mm, α = 90°, α = 150°), wykonanych z Cu, Fe, Mo, W, o odległości między osiami elektrod 22 mm i 26 mm. Ze skokowego sposobu przemieszczania się nowo powstających kanałów wyładowczych wynika, że tego przemieszczania nic należy wiązać z ruchem masy. Mechanizm tego przemieszczania może być podobny do np. mało rozpowszechnionego mechanizmu, reprezentowanego przez tzw. model chmurowy Maeckera.