Prezentowane badania dotyczą warstw kompozytowych Ni/Al203 wytwarzanych metodą redukcji elektrochemicznej na aluminium. Warstwy wytwarzano w kąpieli Wattsa z różną zawartością polidyspersyjnego proszku A1203. Proces prowadzono z różną gęstością prądu (3 A/dm2i 5 A/dm2) oraz różną szybkością mieszania zawiesiny proszku w kąpieli (300, 400 i 500 obr/min). Przedstawiono topografię i morfologię powierzchni uzyskanych warstw. Scharakteryzowano strukturę materiału tych warstw oraz określono udział objętościowy fazy ceramicznej A1203 w materiale kompozytowym. Wyznaczono mikrotwardość i właściwości tribologiczne materiału warstw oraz ich adhezję do aluminiowego podłoża. Badania wykazały, że warstwy kompozytowe Ni/Al203 wytworzone metodą elektrochemiczną na aluminium charakteryzują się zwartą budową i korzystnymi właściwościami tribologicznymi oraz dobrą adhezją do aluminiowego podłoża.
The paper is focused on investigations of properties of surface composite Ni/Al203layers produced by the electrochemical method on aluminum. The layers were produced in the Watt bath with different contents of polydisperse Al03powder. The process of layer deposition was realized at different current densities .i.e.3 A/dm2and 5 A/dm2and with different speeds of mixing of the powder suspension in the bath (300, 400 and 500 turns/min). The topography and morphology of the produced layers are presented. The structure of the surface deposits is characterized and the volume content of the ceramic phase in the composite material is determined. The microhardness and tribological properties of the produced layers as well as their adhesion to the aluminum substrate are determined. The performed investigations have proved that the composite Ni/Al203 layers manufactured by the electrochemical method on aluminum exhibit compact structure and favorable tribological properties as well as very good adhesion to the aluminum substrate.