This work was aimed at investigating the formation of nitrided layers during the isothermal transformation (austempering) and at describing the formed nitrided layer properties. The tested steels were characterized by a different content of carbon and alloying elements. In the case ofthe isothermal transformation, 4 variants of heat treatment parameters of nitrided layers were applied. The heat treatment differed in the austenitizing temperature (750°C-860°C) and the isothermal transformation temperature (390°C-420°C). The microstructure and the mechanical properties (hardness) of the nitrided layers formed after the heat treatment processes were determined. After the nitriding process, during 30 hours in the nitriding atmosphere consisting only of ammonia, the high nitrogen saturation in the surface zone of the layers was obtained. The nitrided layers, after the heat treatment processes, were characterized by the diversified thickness, as evidenced by the hardness distributions at their cross-sections.
Niniejsza praca miała na celu zbadanie kształtowania się warstw azotowanych podczas przemiany izotermicznej oraz opis właściwości powstałej warstwy azotowanej. Badane stale charakteryzowały się różną zawartością węgla oraz zawartością pierwiastków stopowych. W przypadku przemiany izotermicznej zastosowano 4 warianty parametrów obróbki cieplnej warstw azotowanych. Obróbka cieplna różniła się temperaturą austenityzowania (750°C-860°C) i temperaturą przemiany izotermicznej (390°C-420°C). Określono mikrostrukturę oraz właściwości mechaniczne (twardość) powstałych warstw azotowanych po procesach obróbki cieplnej. Po procesie azotowania, w czasie 30 h w atmosferze azotującej, składającej się tylko z amoniaku, uzyskano wysokie nasycenie azotem w powierzchniowej strefie warstw. Warstwy azotowane, po procesach obróbki cieplnej, charakteryzowały się zróżnicowaną grubością, o czym świadczą rozkłady twardości na ich przekrojach.