W artykule przedstawiono wyniki badań próbek z betonu komórkowego o klasie gęstości 500 kg/m3. Próbki poddano intensywnemu działaniu wody, a następnie suszono w warunkach laboratoryjnych, tj. w temperaturze ok. 20°C i wilgotności względnej ok. 30%. Proces suszenia trwał sześć miesięcy. W kolejnych miesiącach trwania procesu przedstawiano zmienne profile zawartości wilgoci. Proces suszenia dostarcza informacji o materiale w szerokim zakresie wilgotności względnych – od zakresu higroskopijnego do zakresu nasyconego. Jednakże nie ma norm dotyczących badania tego procesu. Nie ma określonego parametru materiałowego, który należałoby wyznaczać. W literaturze można jedynie znaleźć propozycje określania parametrów suszenia.
The article presents the results of an experiment which were conducted on the samples of aerated concrete of density class 500 kg/m3. The samples were previously exposed to excess moisture and then dried in laboratory conditions i.e. at the temperature of approximately 20°C and at the relative humidity of approximately 30%. The drying process has lasted six months. In the following months of the experiment the variable profiles of moisture content through partition thickness were recreated. The drying experiment provides information about the material in a wide range of relative humidity – from the hygroscopic to the supersaturated range. However, there are no standards for testing this process. There is no specific material parameter that should be determined. Only proposals for determining drying parameters are given in the literature.