Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
The Zr–Ce–La system is characterized by a miscibility gap and a monotectic reaction. It separates into Zr-rich and CeLa-rich liquids upon cooling through the gap. Based on this system, a new Zr–Ce–La–Al–Co monotectic system was created to synthesize liquid-phase-separated bulk metallic glasses (LPS-BMGs) by copper mold casting. A systematical investigation was performed for the effects of the relative...
A middle-frequency (MF) unbalanced magnetron sputtering system equipped with an electron source was designed and used for deposition of CrN thick films under various MF power (1.4–14kW) at fixed temperature, pressure, and gas flow rate. The deposition rate was increased with increasing MF power and the structure and N/Cr ratio of the deposited CrN films exhibited a complicated behavior, where the...
Particle melting behavior during high-velocity oxygen fuel (HVOF) thermal spraying was investigated using Inconel 625 powders. The powder characteristics and coating properties were investigated using scanning electron microscopy (SEM), x-ray, and microhardness studies. Results indicated that the volume fraction of unmelted particles in the coatings was dependent on the proportion of powder within...
Chromium nitride (CrN) films were synthesized by ion beam enhanced deposition (IBED) process which involves using an argon ion beam to sputter the chromium target while using a nitrogen ion beam to bombard the deposited film. The surface and cross-section morphologies of CrN films were studied by scanning electron microscope (SEM) and atomic force microscope (AFM). The distribution of chemical composition...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.