Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
Different average diameter matrix powders are used in the preparation of the scandate dispenser cathode. Based on a series of techniques such as pressing, sintering and impregnating, the scandate dispenser cathode samples are gained. The results show that: the cathodes made of the different average diameter powders which D(5,0) are 0.45μm, 1.3μm, 2.2μm exhibit excellent performance. The pulse emission...
In this paper, the polycrystalline CexPr1-xB6 (0≤x≤0.6)) bulks were successfully fabricated by spark plasma sintering (SPS). A lot of experiments are conducted to testing the mechanical and emission properties. The technological applications parameters are following: the sintering temperature is 1450°C, the sintering pressure is 50 MPa and the holding time is 5 min. The maximum pulse thermionic emission...
Nanocomposite Sc2O3-added tungsten dispenser cathodes are being developed for a 220 GHz sheet beam TWT (SBTWT) and were tested in Cathode Life Test Vehicles (CLTV) with a Pierce gun configuration under CW mode. In CLTV #1, owing to a perveance issue (there is a 100 micron gap between the focus electrode and cathode emission surface), 10 A/cm2 dc current density can be achieved at practical temperature...
Sc2O3-doped W powder for use in high current density thermionic cathodes has been made by the sol-gel method with different particle sizes. Sc2O3-W matrix cathodes have been prepared from these powders, and have shown excellent emission properties. A space charge limited current density of 40 A/cm2 at 850°C, and 170 A/cm2 at 1050°C have been obtained by using 300-500 nm Sc2O3-doped (5.0 wt.%) W powders...
Sc2O3-doped W powder for use in high current density thermionic cathodes has been made by the sol-gel method with different particle sizes. Sc2O3-W matrix cathodes have been prepared from these powders, and have shown excellent emission properties. A space charge limited current density of 80 A/cm2 at 1150°C, 50 A/cm2 at 1050°C have been obtained by using 500 nm Sc2O3-doped W powders. Life testing...
Nano Sc2O3-doped W powder for use in high current density thermionic cathodes has been made by the sol-gel method with different average particle size: around 72 nm, 146 nm, 272 nm, and 587 nm, respectively. By using these powders, Sc2O3-doped tungsten matrices with the nanosize tungsten grains were obtained as discussed in this paper. Sc2O3-doped W matrix impregnated cathodes have shown excellent...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.