Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
In recent years, many researchers take great interest on visible light communication (VLC), due to its rich spectrum resources, no electromagnetic interference, good confidentiality, etc. In the visible light communication system, the information is loaded into the LED, then the light is transmitted in the free space, and the detector receives the signal. As the result of the −3dB modulation bandwidth...
The performance of white LED is highly dependent on the current effect and thermal effect. In this work, a measurement equipment is designed and set up to study the relationships among light output, current and junction temperature by controlling the junction temperature. Results revealed that the luminous flux increases nonlinearly with increasing current and decreases as junction temperature increases...
In this study, we have systematically investigated the effect of Si doping level in the -cladding layer on the performance of InGaN/GaN-based light-emitting diodes (LEDs). Detailed structural, optical and electrical properties of the sample with different Si doping level were studied. Based on these investigations, it was found that with a low level of Si doping (0.738 nmol/min, ...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.