Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
Electrolytic nickel powder and water-atomized Fe36Ni alloy powder were consolidated into combined compacts with the “two-layer pressing” technique. The compacts, 1.6 mm thick, were sintered at 1200 and 1300‡C in hydrogen, and then rolled into strips 0.8 mm thick. The rolled and annealed strips were fixed at one end as a cantilever beam,and heated gradually from room temperature to 200‡C, in order to measure the thermal deflection of the free end. The measured displacement was always less than the theoretically calculated value, due to the existence of pores in the sintered products. The effect of the temperature and time of sintering on the thermal deflection of the bimetal strips was investigated. It was found that the proper degree of sintering is essential for the bimetal strip to exhibit the largest displacement upon heating. The microstructure and chemical composition across the nickel layer, the contact interface, and the Fe36Ni layer were examined with a SEM and EPMA...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.