Serwis Infona wykorzystuje pliki cookies (ciasteczka). Są to wartości tekstowe, zapamiętywane przez przeglądarkę na urządzeniu użytkownika. Nasz serwis ma dostęp do tych wartości oraz wykorzystuje je do zapamiętania danych dotyczących użytkownika, takich jak np. ustawienia (typu widok ekranu, wybór języka interfejsu), zapamiętanie zalogowania. Korzystanie z serwisu Infona oznacza zgodę na zapis informacji i ich wykorzystanie dla celów korzytania z serwisu. Więcej informacji można znaleźć w Polityce prywatności oraz Regulaminie serwisu. Zamknięcie tego okienka potwierdza zapoznanie się z informacją o plikach cookies, akceptację polityki prywatności i regulaminu oraz sposobu wykorzystywania plików cookies w serwisie. Możesz zmienić ustawienia obsługi cookies w swojej przeglądarce.
Ultra-high molecular weight isotactic poly(1-butene) (UHMW-PB1) melt-grown crystal (MGC) films were drawn using the PIN drawing technique. Although the UHMW-PB1 MGC films had poor ductility in the crystalline state, they were ultradrawable in the molten state above the static melting temperature (T m ). The drawability of the MGC films was strongly influenced by the draw temperature, the sample...
The uniaxial drawing of UHMW-PAN fibers spun from a dilute solution into methanol coagulation baths at different temperatures and the resultant structure and tensile properties of the drawn products were studied. Although the initial morphology of the fibers and the deformation mode in a lower draw ratio (DR t ) range were significantly dependent on the temperatures of the coagulation bath,...
A film of poly(l-lactic acid) (PLLA) consisting of highly oriented α crystals was uniaxially drawn by tensile force. The effects of the draw ratio (DR), draw temperature (T d ), and draw stress on the crystal/crystal transformation from the α- to the β-form crystals were studied. At the initial stage of drawing, the highly oriented α crystals of the starting film transformed into a broader...
Podaj zakres dat dla filtrowania wyświetlonych wyników. Możesz podać datę początkową, końcową lub obie daty. Daty możesz wpisać ręcznie lub wybrać za pomocą kalendarza.