The intermetallic compounds, Cu6Sn5 and Cu3Sn, have been prepared via layer-by-layer and single-layer electroplating with subsequent annealing. The two preparation methods were compared in terms of annealing temperature and time, different electroplating effect, and film thickness. Moreover, two copper plates were joined together to form a full-IMC (Cu6Sn5 and Cu3Sn) joint. The shear mechanical property of the IMCs was studied by stretching the plates under different rates. Finally, it was found that the average shear strength of the IMC joints was up to 0.84 MPa when the thickness of the IMC was less than 3 μm. Fracture analysis indicates that the Cu6Sn5 lead to cleavage fracture while the Cu3Sn shows typical intergranular fracture.