Ti45Nb is a promising choice as an implant material due to its low Young's modulus and its good biocompatibility, however the material's strength is relatively low in the conventionally coarse-grained state. Recently, severe plastic deformation was suggested to improve the mechanical properties of such materials. In this study the influence of the testing direction on the mechanical properties including strength, ductility and fracture toughness is investigated using relatively large HPT samples with a diameter of ~30mm and a thickness of ~7mm. It is shown that especially the strength and fracture toughness develop a pronounced orientation dependence. With respect to the testing direction, the strength increased from ~400MPa in the coarse-grained state to around 950 to 1050MPa after deformation and the fracture toughness remains quite high with values between 75 and 110MPam1/2. Hence, the deformed Ti45Nb alloy represents an alternative to other Ti-alloys recently used as implant materials with the major advantage of having a low Young's modulus combined with high strength and fracture toughness.