The detection of NO 2 in ambient air requires sensors that are capable of measuring concentrations in the low ppb range at high resolution. Using a cyclic measuring technique, a resolution below 1 ppb has been attained at NO 2 concentrations below 10 ppb with a surface acoustic wave (SAW) sensor. This technique requires that the SAW sensor is first put into a defined initial state by a combination of heating and evacuation, where it is almost totally freed from residual NO 2 adsorbates. From this state, NO 2 concentration is determined from the temporal change of the SAW attenuation, which is proportional to the NO 2 coverage. Advantages of this technique are that previously adsorbed test gas is rapidly removed and that drift of the sensor is eliminated. An increase of the lifetime of the sensor in ambient air was found to be possible by using an ozone filter.