Search results for: Luciano Tarricone

Items from 1 to 20 out of 99 results

article

Wireless resonant energy link for pulse generators implanted in the chest

Giuseppina Monti, Maria V. De Paolis, Laura Corchia, Luciano Tarricone

IET Microwaves, Antennas & Propagation > 2017 > 11 > 15 > 2201 - 2210

This study investigates the feasibility of using the MedRadio band for wirelessly transmitting power to a rechargeable medical device implanted in the chest. In particular, a wireless energy link operating at 403 MHz and based on an inductive coupling between two planar resonators is considered, and its performance is assessed through simulations and experimental tests. Results show that a maximum...

article

Microwave characterisation of polylactic acid for 3D-printed dielectrically controlled substrates

Luca Catarinucci, Riccardo Colella, Paolo Coppola, Luciano Tarricone

IET Microwaves, Antennas & Propagation > 2017 > 11 > 14 > 1970 - 1976

In this study, the characterisation of three-dimensional (3D)-printed substrates in terms of relative dielectric constant and loss tangent by using the T-resonator method is proposed. In particular, after the theoretical formulation of this method, the T-shape structure has been realised and its effectiveness in characterising also 3D-printed substrates in the frequency range between 800 and 5000...

chapter

Matched resonant inductive WPT using the coupling-independent regime: Theory and experiments

Alessandra Costanzo, Wenquan Che, Marco Dionigi, Franco Mastri, more

2017 47th European Microwave Conference (EuMC) > 204 - 207

2017 47th European Microwave Conference (EuMC)

In this paper a design procedure for achieving a coupling-independent matched WPT link based on inductive coupling is presented. It is theoretically and experimentally shown that an appropriate selection of the operating frequency allows realizing a link with values of the input and output impedances which are independent of the coupling coefficient.

article

Comparison of Fabrication Techniques for Flexible UHF RFID Tag Antennas [Wireless Corner]

Riccardo Colella, Almudena Rivadeneyra, Alberto J. Palma, Luciano Tarricone, more

IEEE Antennas and Propagation Magazine > 2017 > 59 > 5 > 159 - 168

The astonishing boom of radio-frequency identification (RFID) technology is stimulating plenty of new RFID-based industrial applications. Consequently, in the very near future, an almost unlimited number of RFID tags could be embedded into manufactured goods of various shapes, assets, and machineries to enable their communication abilities. As a result, prototyping techniques of RFID tags on flexible...

chapter

Characterization of wireless power transfer links by network invariants

Franco Mastri, Mauro Mongiardo, Giuseppina Monti, Luciano Tarricone

2017 International Conference on Electromagnetics in Advanced Applications (ICEAA) > 590 - 593

2017 International Conference on Electromagnetics in Advanced Applications (ICEAA)

Networks for wireless power transfer are currently receiving considerable interest. However, it is important to have a common set of parameters in order to describe the performance of these networks. These parameters are the gains and the conjugate image immittances. The conjugate image immittances play a fundamental role and, in this contribution, they are all described in terms of the Rollett stability...

chapter

Wearable antennas for applications in remote assistance to elderly people

Laura Corchia, Egidio De Benedetto, Giuseppina Monti, Andrea Cataldo, more

2017 IEEE International Workshop on Measurement and Networking (M&N) > 1 - 6

2017 IEEE International Workshop on Measurements & Networking (M&N)

An effective remote monitoring of elderly people in telehealth applications requires their everyday activities not to be affected by the monitoring. In this regard, a possible strategy is to make sure that the components (i.e. sensor and antenna) necessary to carry out such monitoring are seamlessly integrated within the elderly's daily routine. Starting from these considerations, the present paper...

article

Conditions for a Load-Independent Operating Regime in Resonant Inductive WPT

Alessandra Costanzo, Marco Dionigi, Franco Mastri, Mauro Mongiardo, more

IEEE Transactions on Microwave Theory and Techniques > 2017 > 65 > 4 > 1066 - 1076

This paper provides a rigorous theoretical formulation to obtain an inductive resonant wireless power transfer (WPT) link with load-independent output voltage or current. This is a crucial working condition for wireless battery recharging, where there is no deterministic knowledge of load variation with respect to the battery charging level. The ideal lossless and the realistic lossy configurations...

chapter

Resonant inductive WPT link operating in a coupling-independent regime

Alessio De Angelis, Marco Dionigi, Paolo Carbone, Mauro Mongiardo, more

2017 International Applied Computational Electromagnetics Society Symposium - Italy (ACES) > 1 - 2

2017 International Applied Computational Electromagnetics Society Symposium - Italy (ACES)

In this paper the feasibility of achieving a coupling-independent performance for a Wireless Power Transfer Link based on resonant inductive coupling is investigated. Theoretical and experimental results demonstrating that a coupling-independent regime can be realized by an appropriate selection of the operating frequency of a strongly-coupled synchronous WPT link are reported and discussed.

article

Wireless Power Transfer With Three-Ports Networks: Optimal Analytical Solutions

Giuseppina Monti, Wenquan Che, Qinghua Wang, Alessandra Costanzo, more

IEEE Transactions on Circuits and Systems I: Regular Papers > 2017 > 64 > 2 > 494 - 503

A wireless transfer link between three magnetically coupled resonators has been considered. Two different configurations have been investigated. In one case a single transmitter and two receivers are present. In the other case two transmitters and a single receiver are employed. For each case optimal analytical solutions for the load values that maximize the power delivered to the load(s) and the...

chapter

Genetic Optimization for Optimum 3G Network Planning: an Agent-Based Parallel Implementation

Alessandra Esposito, Luciano Tarricone, Stefano Luceri, Marco Zappatore

Novel Algorithms and Techniques in Telecommunications and Networking > 189-194

The continuous evolution of wireless networks, as well as the attention paid by the public opinion to human exposure to electromagnetic fields radiated by basestation antennas, render the development of software tools to support optimum design and planning of 3G networks highly desirable. Though many tools are already available, open problems are still on the table. One key issue is represented by...

article

A Network Approach for Wireless Resonant Energy Links Using Relay Resonators

Giuseppina Monti, Laura Corchia, Luciano Tarricone, Mauro Mongiardo

IEEE Transactions on Microwave Theory and Techniques > 2016 > 64 > 10 > 3271 - 3279

In this paper, a network approach for the analysis of a wireless resonant energy link consisting of

$N$

inductively coupled

$LC$

resonators is proposed. By using an artificial transmission line approach, the wireless link is modeled as a transmission line described by effective parameters. It is shown that the analyzed system exhibits a passband filter behavior. More specifically, the reported...

chapter

Power maximization in a WPT link using three transmitters and a single receiver

Giuseppina Monti, Alessandra Costanzo, Franco Mastri, Mauro Mongiardo, more

2016 46th European Microwave Conference (EuMC) > 1143 - 1146

2016 46th European Microwave Conference (EuMC)

In this paper the problem of maximizing the power delivered to the load in a wireless power transmission link with three transmitters and a single receiver is theoretically solved. The case of four magnetically coupled resonators is considered and analytical formulas for the optimum load are derived and validated by circuit simulations.

article

Wearable logo-antenna for GPS–GSM-based tracking systems

Giuseppina Monti, Laura Corchia, Egidio De Benedetto, Luciano Tarricone

IET Microwaves, Antennas & Propagation > 2016 > 10 > 12 > 1332 - 1338

This study presents a wearable antenna for a global positioning system–global system for mobile communication (GPS–GSM)-based anti-theft tracking system to be embedded in high-cost clothing and luggage accessories (such as leather bags). To assess the feasibility of this solution, a prototype antenna was designed mimicking the shape of one of the Levi Strauss & Co.’s logos, and it was fabricated...

chapter

Improved RFID tag characterization system: Use case in the IoT arena

Riccardo Colella, Luca Catarinucci, Luciano Tarricone

2016 IEEE International Conference on RFID Technology and Applications (RFID-TA) > 172 - 176

2016 IEEE International Conference on RFID Technology and Applications (RFID-TA)

Radio-frequency identification (RFID) is one of the most promising technologies to enable new smart applications in the framework of the Internet of Things (IoT). Nevertheless, from the electromagnetic point of view, the performance of the RFID tags is generally dependent on the context, so that the selection of the most suitable tag for the specific application becomes the key point. In this work,...

article

Improved Battery-Less Augmented RFID Tag: Application on Ambient Sensing and Control

Riccardo Colella, Luca Catarinucci, Luciano Tarricone

IEEE Sensors Journal > 2016 > 16 > 10 > 3484 - 3485

In this letter, an improved version of a recently published battery-less augmented radio frequency identification device enabling a tag-reader cooperative approach is presented. Based on a specifically designed physical layer implementing a logical communication procedure over low-level reader protocol, the device is now capable to react to the reader solicitations by reasoning, asking for extra info,...

chapter

Iterative Solution of Linear Systems in Electromagnetics (And Not Only): Experiences with CUDA

Danilo Donno, Alessandra Esposito, Giuseppina Monti, Luciano Tarricone

Lecture Notes in Computer Science > Euro-Par 2010 Parallel Processing Workshops > Third Workshop on UnConventional High Performance Computing (UCHPC 2010) > 329-337

In this paper, we propose the use of graphics processing units as a low-cost and efficient solution of electromagnetic (and other) numerical problems. Based on the software platform CUDA (Compute Unified Device Architecture), a solver for unstructured sparse matrices with double precision complex data has been implemented and tested for several practical cases. Benchmark results confirm the validity...

article

Programming UHF RFID Systems for the Internet of Things EM Programmer's Notebook

Riccardo Colella, Alessandra Esposito, Luca Catarinucci, Luciano Tarricone

IEEE Antennas and Propagation Magazine > 2016 > 58 > 2 > 109 - 119

Most of the articles in the EM Programmers Notebook column address either computational electromagnetics or electromagnetic simulation of one form or another. The article in this issues EM Programmers Notebook column instead considers new radio-frequency identification tags; these tags contain some embedded local processing capability and provide several new functionalities, such as autonomous...

article

Measurement Platform for Electromagnetic Characterization and Performance Evaluation of UHF RFID Tags

Riccardo Colella, Luca Catarinucci, Paolo Coppola, Luciano Tarricone

IEEE Transactions on Instrumentation and Measurement > 2016 > 65 > 4 > 905 - 914

The huge improvement in UHF radio-frequency identification (RFID) technology, also driven by the vision of the Internet of Things, is leading to a widespread diffusion of several kinds of passive RFID tags. In fact, depending on the specific application, tags must satisfy key requirements in terms of size, thickness, shape, robustness, cost, working range, bandwidth, antenna directivity, platform...

chapter

Extending OWL-S to nested services: an application to optimum wireless network planning

Alessandra Esposito, Luciano Tarricone, Laura Vallone

Innovations and Advances in Computer Sciences and Engineering > 191-195

The migration of existing applications to service-oriented paradigm generate services with variegate behaviours and way of interacting with one another. In some cases, available technologies for demarcating services do not provide suited constructs to codify such interactions. As an example, migrating wireless network planning codes towards a service-oriented environment generates a sort of “nested”...

article

Evaluating the suitability of specific RFID tags for IoT applications through a new characterization platform

Riccardo Colella, Luca Catarinucci, Luciano Tarricone

02016 International Multidisciplinary Conference on Computer and Energy... > 2016 > 1 - 3

2016 International Multidisciplinary Conference on Computer and Energy Science (SpliTech)

Publication date

Set your own date range

Publication type

book (53)
article (46)

Keywords

RADIOFREQUENCY IDENTIFICATION (24)
RFID (19)
WIRELESS SENSOR NETWORKS (18)
ANTENNA MEASUREMENTS (13)
RADIO FREQUENCY (12)
SENSITIVITY (12)
WIRELESS POWER TRANSMISSION (11)
ANTENNAS (10)
TAG (10)
UHF (10)
ANTENNA RADIATION PATTERNS (9)
IMPEDANCE (9)
SENSORS (8)
COUPLINGS (7)
PERFORMANCE EVALUATION (7)
RFID TAGS (7)
READ RANGE (6)
TEMPERATURE SENSORS (6)
WIRELESS COMMUNICATION (6)
CAPACITORS (5)
INDUCTIVE COUPLING (5)
INTERNET OF THINGS (5)
PROTOTYPES (5)
CHARGE PUMPS (4)
DIPOLE ANTENNAS (4)
ELECTROMAGNETICS (4)
ENERGY EFFICIENCY (4)
ENERGY HARVESTING (4)
INTERNET OF THINGS (IOT) (4)
PATCH ANTENNAS (4)
PORTS (COMPUTERS) (4)
PROTOCOLS (4)
RADIATION PATTERN (4)
RECTENNA (4)
RECTIFIERS (4)
RESONANT FREQUENCY (4)
RESONATORS (4)
RF ENERGY HARVESTING (4)
SWITCHES (4)
TAG ANTENNA (4)
WEARABLE ANTENNAS (4)
ARRAYS (3)
BIOMEDICAL MONITORING (3)
BROADBAND ANTENNAS (3)
BUILDING AUTOMATION (3)
CAPACITANCE (3)
CHARGE PUMP (3)
FREQUENCY MEASUREMENT (3)
GENERATORS (3)
GNU-RADIO (3)
MAGNETIC COUPLING (3)
MICROWAVE ANTENNAS (3)
MONITORING (3)
MONOPOLE (3)
ONTOLOGY (3)
PASSIVE RFID TAGS (3)
RADIO-FREQUENCY IDENTIFICATION (RFID) (3)
READER ANTENNA (3)
SENSOR INTEGRATION (3)
SOFTWARE RADIO (3)
SOFTWARE-DEFINED RADIO (3)
UHF ANTENNAS (3)
WIRELESS POWER TRANSFER (3)
ACCELERATION (2)
ADHESIVE COPPER (2)
ANTENNA ARRAYS (2)
ARTIFICIAL TRANSMISSION LINE (2)
CARDBORD (2)
CIRCULAR POLARIZATION (2)
COLLISION RECOVERY (2)
COMPUTATION (2)
COMPUTER ARCHITECTURE (2)
CONDUCTIVE THREAD (2)
CONTEXT (2)
CONVERSION EFFICIENCY (2)
CROSS-POLARIZED ANTENNAS (2)
CUTTING PLOTTER (2)
DEEP BRAIN STIMULATION (2)
DOWNLINK (2)
ECO-FRIENDLY SUBSTRATE (2)
ELLIPTICAL RESONATOR (2)
ENCODING (2)
FABRICATION TECHNIQUES (2)
FABRICS (2)
FLUORESCENT LAMPS (2)
GEOMETRY (2)
GNU RADIO (2)
GRAPHICS PROCESSING UNIT (2)
GRAPHICS PROCESSING UNIT (GPU) (2)
IMPLANTABLE PULSE GENERATOR (2)
INDUCTORS (2)
INKJET PRINTING (2)
INTEGRATED CIRCUITS (2)
INTELLIGENT SENSORS (2)
LOCALIZATION (2)
LOGO ANTENNA (2)
MAGNETIC RESONANCE (2)
METHOD OF MOMENTS (MOM) (2)
MICROSTRIP ANTENNAS (2)
MOMENT METHODS (2)
more

Data set

ieee (84)
Elsevier (7)
Springer (5)
Wiley (3)

INFONA - science communication portal

Search results for: Luciano Tarricone

Wireless resonant energy link for pulse generators implanted in the chest

Microwave characterisation of polylactic acid for 3D-printed dielectrically controlled substrates

Matched resonant inductive WPT using the coupling-independent regime: Theory and experiments

Comparison of Fabrication Techniques for Flexible UHF RFID Tag Antennas [Wireless Corner]

Characterization of wireless power transfer links by network invariants

Wearable antennas for applications in remote assistance to elderly people

Conditions for a Load-Independent Operating Regime in Resonant Inductive WPT

Resonant inductive WPT link operating in a coupling-independent regime

Wireless Power Transfer With Three-Ports Networks: Optimal Analytical Solutions

Genetic Optimization for Optimum 3G Network Planning: an Agent-Based Parallel Implementation

A Network Approach for Wireless Resonant Energy Links Using Relay Resonators

Power maximization in a WPT link using three transmitters and a single receiver

Wearable logo-antenna for GPS–GSM-based tracking systems

Improved RFID tag characterization system: Use case in the IoT arena

Improved Battery-Less Augmented RFID Tag: Application on Ambient Sensing and Control

Iterative Solution of Linear Systems in Electromagnetics (And Not Only): Experiences with CUDA

Programming UHF RFID Systems for the Internet of Things EM Programmer's Notebook

Measurement Platform for Electromagnetic Characterization and Performance Evaluation of UHF RFID Tags

Extending OWL-S to nested services: an application to optimum wireless network planning

Evaluating the suitability of specific RFID tags for IoT applications through a new characterization platform

Filter options

Publication date

Publication type

Keywords

Data set

Journal

INFONA - science communication portal

Search results for: Luciano Tarricone

Add recipient

Sending message cancelled

Are you sure you want to cancel sending this message?

Send message

Filter options

Publication date

Date range setting

Set the date range to filter the displayed results. You can set a starting date, ending date or both. You can enter the dates manually or choose them from the calendar.

Publication type

Keywords

Data set

Journal

Reporting an error / abuse

Sending the report failed

Accessibility options